Cheat Engine

[plusnan]

Android 7 64 system,process 32bit,ceserver 7.5 x86 ,ce 7.5

In the same Android emulator, my friend can use the function, but I encountered the error.
When I try to F5 OR F6,acctch the debugger of Cheat engine to the current porcess .Continue.


APP Process destroyed .......
--------------------------------LOG-----------------------------


Calling StartDebug(1)
ptrace called (PTRACE_ATTACH(10), 3041, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3047, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3048, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3049, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3050, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3051, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3052, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3053, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3054, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3055, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3056, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3058, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3062, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3065, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3067, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3072, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3079, 0x0, 0x0)
accept=-1
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3080, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3091, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3092, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3093, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3094, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3095, 0x0, 0x0)
accept=7
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3099, 0x0, 0x0)
CEServer Debugger Thread: ptrace called (PTRACE_ATTACH(10), 3100, 0x0, 0x0)
Interrupted by signal. Checking again
Returning queued event (sig=-2, thread=3041)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 4283675, 0xf600a4d0)
GetThreadContext(4283675)
Inside debuggerthread
Invalid tid
result=0
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3041, 0xf600a4d0)
GetThreadContext(3041)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a3d8)
Getting context of thread 3041
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3041, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3041, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3041 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3041, 0xf6f92000)
SetThreadContext(3041)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3041, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
Virtual event. Ignore
Returning queued event (sig=-1, thread=3041)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3041, 0xf600a4d0)
GetThreadContext(3041)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a3d8)
Getting context of thread 3041
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3041, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3041, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3041, 0xf600a4d0)
GetThreadContext(3041)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a3d8)
Getting context of thread 3041
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3041, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3041, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3041 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3041, 0xf6f92000)
SetThreadContext(3041)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3041, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
r=1
result=1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3047)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3047, 0xf600a4d0)
GetThreadContext(3047)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3047, 0x0, 0xf600a3d8)
Getting context of thread 3047
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3047, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3047, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3047, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3047, 0xf600a4d0)
GetThreadContext(3047)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3047, 0x0, 0xf600a3d8)
Getting context of thread 3047
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3047, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3047, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3047, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3047 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3047, 0xf6f92000)
SetThreadContext(3047)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3047, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3047, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3047, 0x0, 0x0)
r=1
result=1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3048)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3048, 0xf600a4d0)
GetThreadContext(3048)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3048, 0x0, 0xf600a3d8)
Getting context of thread 3048
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3048, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3048, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3048, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3048, 0xf600a4d0)
GetThreadContext(3048)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3048, 0x0, 0xf600a3d8)
Getting context of thread 3048
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3048, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3048, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3048, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3048 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3048, 0xf6f92000)
SetThreadContext(3048)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3048, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3048, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3048, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
Virtual event. Ignore
Returning queued event (sig=-1, thread=3049)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3049, 0xf600a4d0)
GetThreadContext(3049)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3049, 0x0, 0xf600a3d8)
Getting context of thread 3049
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3049, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3049, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3049, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3049, 0xf600a4d0)
GetThreadContext(3049)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3049, 0x0, 0xf600a3d8)
Getting context of thread 3049
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3049, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3049, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3049, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3049 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3049, 0xf6f92000)
SetThreadContext(3049)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3049, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3049, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3049, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
Virtual event. Ignore
Returning queued event (sig=-1, thread=3050)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3050, 0xf600a4d0)
GetThreadContext(3050)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3050, 0x0, 0xf600a3d8)
Getting context of thread 3050
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3050, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3050, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3050, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3050, 0xf600a4d0)
GetThreadContext(3050)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3050, 0x0, 0xf600a3d8)
Getting context of thread 3050
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3050, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3050, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3050, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3050 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3050, 0xf6f92000)
SetThreadContext(3050)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3050, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3050, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3050, 0x0, 0x0)
r=1
result=1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3051)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3051, 0xf600a4d0)
GetThreadContext(3051)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3051, 0x0, 0xf600a3d8)
Getting context of thread 3051
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3051, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3051, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3051, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3051, 0xf600a4d0)
GetThreadContext(3051)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3051, 0x0, 0xf600a3d8)
Getting context of thread 3051
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3051, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3051, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3051, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3051 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3051, 0xf6f92000)
SetThreadContext(3051)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3051, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3051, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3051, 0x0, 0x0)
r=1
result=1
Virtual event. Ignore
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, -1, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from outside the debuggerthread. Waking debuggerthread
Sending message to the debuggerthread
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, -1, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling SetBreakpoint for all threads
SetBreakpoint(1, 3041, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3041
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a000
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3041, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3041
CEServer Debugger Thread: ptrace called ((3), 3041, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3041, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3041, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3041, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3047, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3047
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a020
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3047, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3047
CEServer Debugger Thread: ptrace called ((3), 3047, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3047, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3047, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3047, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3048, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3048
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a040
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3048, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3048
CEServer Debugger Thread: ptrace called ((3), 3048, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3048, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3048, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3048, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3049, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3049
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a060
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3049, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3049
CEServer Debugger Thread: ptrace called ((3), 3049, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3049, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3049, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3049, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3050, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3050
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a080
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3050, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3050
CEServer Debugger Thread: ptrace called ((3), 3050, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3050, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3050, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3050, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3051, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3051
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a0a0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3051, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3051
CEServer Debugger Thread: ptrace called ((3), 3051, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3051, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3051, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3051, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3052, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3052
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a0c0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3052, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3052
CEServer Debugger Thread: ptrace called ((3), 3052, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3052, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3052, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3052, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3053, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3053
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a0e0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3053, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3053
CEServer Debugger Thread: ptrace called ((3), 3053, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3053, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3053, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3053, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3054, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3054
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a100
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3054, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3054
CEServer Debugger Thread: ptrace called ((3), 3054, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3054, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3054, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3054, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3055, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3055
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a120
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3055, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3055
CEServer Debugger Thread: ptrace called ((3), 3055, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3055, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3055, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3055, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3056, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3056
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a140
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3056, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3056
CEServer Debugger Thread: ptrace called ((3), 3056, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3056, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3056, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3056, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3058, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3058
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a160
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3058, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3058
CEServer Debugger Thread: ptrace called ((3), 3058, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3058, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3058, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3058, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3062, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3062
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a180
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3062, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3062
CEServer Debugger Thread: ptrace called ((3), 3062, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3062, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3062, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3062, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3065, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3065
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a1a0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3065, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3065
CEServer Debugger Thread: ptrace called ((3), 3065, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3065, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3065, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3065, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3067, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3067
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a1c0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3067, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3067
CEServer Debugger Thread: ptrace called ((3), 3067, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3067, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3067, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3067, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3072, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3072
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a1e0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3072, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3072
CEServer Debugger Thread: ptrace called ((3), 3072, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3072, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3072, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3072, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3079, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3079
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a200
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3079, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3079
CEServer Debugger Thread: ptrace called ((3), 3079, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3079, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3079, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3079, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3080, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3080
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a220
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3080, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3080
CEServer Debugger Thread: ptrace called ((3), 3080, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3080, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3080, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3080, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3091, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3091
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a240
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3091, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3091
CEServer Debugger Thread: ptrace called ((3), 3091, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3091, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3091, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3091, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3092, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3092
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a260
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3092, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3092
CEServer Debugger Thread: ptrace called ((3), 3092, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3092, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3092, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3092, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3093, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3093
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a280
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3093, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3093
CEServer Debugger Thread: ptrace called ((3), 3093, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3093, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3093, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3093, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3094, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3094
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a2a0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3094, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3094
CEServer Debugger Thread: ptrace called ((3), 3094, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3094, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3094, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3094, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3095, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3095
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a2c0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3095, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3095
CEServer Debugger Thread: ptrace called ((3), 3095, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3095, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3095, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3095, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3099, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3099
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a2e0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3099, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3099
CEServer Debugger Thread: ptrace called ((3), 3099, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3099, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3099, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3099, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint(1, 3100, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3100
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a300
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3100, 0x0, 0xf600a348)
k=0 (number of tries)
Setting breakpoint in thread 3100
CEServer Debugger Thread: ptrace called ((3), 3100, 0x118, 0x0)
Setting DR7 to 30001
CEServer Debugger Thread: ptrace called ((6), 3100, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3100, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3100, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Returning queued event (sig=-1, thread=3052)
Received reply from debugger thread: 1
SetBreakpoint returned 1
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3052, 0xf600a4d0)
GetThreadContext(3052)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3052, 0x0, 0xf600a3d8)
Getting context of thread 3052
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3052, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3052, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3052, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Error: recv returned 0
Peer has disconnected
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3052, 0xf600a4d0)
GetThreadContext(3052)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3052, 0x0, 0xf600a3d8)
Getting context of thread 3052
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3052, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3052, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3052, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3052 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3052, 0xf6f92000)
SetThreadContext(3052)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3052, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3052, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3052, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3052, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3052
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a0c0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3052, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3052
CEServer Debugger Thread: ptrace called ((3), 3052, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3052, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3052, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3052, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3053)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3053, 0xf600a4d0)
GetThreadContext(3053)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3053, 0x0, 0xf600a3d8)
Getting context of thread 3053
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3053, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3053, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3053, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3053, 0xf600a4d0)
GetThreadContext(3053)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3053, 0x0, 0xf600a3d8)
Getting context of thread 3053
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3053, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3053, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3053, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3053 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3053, 0xf6f92000)
SetThreadContext(3053)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3053, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3053, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3053, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3053, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3053
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a0e0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3053, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3053
CEServer Debugger Thread: ptrace called ((3), 3053, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3053, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3053, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3053, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3054)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3054, 0xf600a4d0)
GetThreadContext(3054)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3054, 0x0, 0xf600a3d8)
Getting context of thread 3054
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3054, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3054, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3054, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3054, 0xf600a4d0)
GetThreadContext(3054)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3054, 0x0, 0xf600a3d8)
Getting context of thread 3054
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3054, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3054, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3054, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3054 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3054, 0xf6f92000)
SetThreadContext(3054)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3054, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3054, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3054, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3054, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3054
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a100
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3054, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3054
CEServer Debugger Thread: ptrace called ((3), 3054, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3054, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3054, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3054, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3055)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3055, 0xf600a4d0)
GetThreadContext(3055)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3055, 0x0, 0xf600a3d8)
Getting context of thread 3055
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3055, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3055, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3055, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3055, 0xf600a4d0)
GetThreadContext(3055)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3055, 0x0, 0xf600a3d8)
Getting context of thread 3055
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3055, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3055, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3055, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3055 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3055, 0xf6f92000)
SetThreadContext(3055)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3055, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3055, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3055, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3055, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3055
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a120
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3055, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3055
CEServer Debugger Thread: ptrace called ((3), 3055, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3055, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3055, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3055, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3056)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3056, 0xf600a4d0)
GetThreadContext(3056)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3056, 0x0, 0xf600a3d8)
Getting context of thread 3056
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3056, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3056, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3056, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3056, 0xf600a4d0)
GetThreadContext(3056)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3056, 0x0, 0xf600a3d8)
Getting context of thread 3056
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3056, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3056, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3056, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3056 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3056, 0xf6f92000)
SetThreadContext(3056)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3056, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3056, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3056, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3056, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3056
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a140
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3056, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3056
CEServer Debugger Thread: ptrace called ((3), 3056, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3056, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3056, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3056, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3058)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3058, 0xf600a4d0)
GetThreadContext(3058)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3058, 0x0, 0xf600a3d8)
Getting context of thread 3058
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3058, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3058, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3058, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3058, 0xf600a4d0)
GetThreadContext(3058)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3058, 0x0, 0xf600a3d8)
Getting context of thread 3058
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3058, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3058, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3058, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3058 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3058, 0xf6f92000)
SetThreadContext(3058)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3058, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3058, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3058, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3058, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3058
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a160
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3058, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3058
CEServer Debugger Thread: ptrace called ((3), 3058, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3058, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3058, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3058, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3062)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3062, 0xf600a4d0)
GetThreadContext(3062)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3062, 0x0, 0xf600a3d8)
Getting context of thread 3062
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3062, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3062, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3062, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3062, 0xf600a4d0)
GetThreadContext(3062)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3062, 0x0, 0xf600a3d8)
Getting context of thread 3062
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3062, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3062, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3062, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3062 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3062, 0xf6f92000)
SetThreadContext(3062)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3062, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3062, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3062, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3062, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3062
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a180
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3062, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3062
CEServer Debugger Thread: ptrace called ((3), 3062, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3062, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3062, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3062, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Interrupted by signal. Checking again
Virtual event. Ignore
Returning queued event (sig=-1, thread=3065)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3065, 0xf600a4d0)
GetThreadContext(3065)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3065, 0x0, 0xf600a3d8)
Getting context of thread 3065
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3065, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3065, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3065, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3065, 0xf600a4d0)
GetThreadContext(3065)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3065, 0x0, 0xf600a3d8)
Getting context of thread 3065
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3065, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3065, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3065, 0x0, 0x0)
r=1
result=1
Context.structsize=588
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3065 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3065, 0xf6f92000)
SetThreadContext(3065)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3065, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3065, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3065, 0x0, 0x0)
r=1
result=1
Interrupted by signal. Checking again
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3065, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3065
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a1a0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3065, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3065
CEServer Debugger Thread: ptrace called ((3), 3065, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3065, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3065, 0x118, 0xf0001)
result=1 (r=0 r2=0)
Continue self broken thread
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3065, 0x0, 0x0)
PTRACE_CONT=0
end of SetBreakpoint reached. result=1
SetBreakpoint returned 1
Virtual event. Ignore
Returning queued event (sig=-1, thread=3067)
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3067, 0xf600a4d0)
GetThreadContext(3067)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3067, 0x0, 0xf600a3d8)
Getting context of thread 3067
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3067, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3067, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3067, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_GETTHREADCONTEXT:
Going to call GetThreadContext(1, 3067, 0xf600a4d0)
GetThreadContext(3067)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3067, 0x0, 0xf600a3d8)
Getting context of thread 3067
context=0xf600a4d0
context->structsize=0xf600a4d0
context->type=0xf600a4d4
context->regs=0xf600a4d8
context->fp=0xf600a51c
CEServer Debugger Thread: ptrace called (PTRACE_GETREGS(c), 3067, 0x0, 0xf600a4d8)
EIP=f7f1bd30
CEServer Debugger Thread: ptrace called ((12), 3067, 0x0, 0xf600a51c)
getRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3067, 0x0, 0x0)
r=1
result=1
Context.structsize=588
Interrupted by signal. Checking again
CMD_SETTHREADCONTEXT:
hProcess=1 tid=3067 structsize=736
received a context with data: structsize=736 type=0
Going to call SetThreadContext(1, 3067, 0xf6f92000)
SetThreadContext(3067)
Inside debuggerthread
This thread was not paused. Pausing it
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3067, 0x0, 0xf600a3d8)
setContext
CEServer Debugger Thread: ptrace called (PTRACE_SETREGS(d), 3067, 0x0, 0xf6f92008)
setRegisters() returned 0
The thread was not paused, so resuming it now
CEServer Debugger Thread: ptrace called (PTRACE_CONT(7), 3067, 0x0, 0x0)
r=1
result=1
CMD_SETBREAKPOINT. sizeof(sb)=28
Calling SetBreakpoint
SetBreakpoint(1, 3067, 0, 0xd2fb9cc8, 3, 4)
SetBreakpoint from debuggerthread
Calling setbreakpoint for thread :3067
isdebugged=0
Target thread wasn't stopped yet
td=0xf7c2a1c0
td->isPaused=0
Not yet paused
CEServer Debugger Thread: ptrace called (PTRACE_GETSIGINFO(4202), 3067, 0x0, 0xf600a3b8)
k=0 (number of tries)
Setting breakpoint in thread 3067
CEServer Debugger Thread: ptrace called ((3), 3067, 0x118, 0x0)
Setting DR7 to f0001
CEServer Debugger Thread: ptrace called ((6), 3067, 0xfc, 0xd2fb9cc8)
CEServer Debugger Thread: ptrace called ((6), 3067, 0x118, 0xf0001)
result=1 (r=0 r