Cheat Engine

Zcythe · Posted: Sat Aug 08, 2009 10:13 pm Post subject: Some one help me overclock?

Well i have a Q8200 and my problem is i just want it from 2.33ghz to 2.5 that's it. And no matter how small of an increase, i set my memory timings correct, im pretty sure keep vcore voltage at auto for first boot. And i cant even get to motherboard screen thing i have tried setting voltage manually but it never ever gets to that screen ever. I have looked at toms hardware huge quad guide and tried the things on it but still wont work. Also i wanted to ask how do i know what kind of mode do i pick for my fsb and such like 1:1 or synchronous, how do i know which one?

Saifallofjmr · Posted: Sat Aug 08, 2009 10:33 pm Post subject:

never put voltage at auto, i dont over clock and i know that

Zcythe · Posted: Sat Aug 08, 2009 10:34 pm Post subject:

Cheetah · Posted: Sat Aug 08, 2009 11:05 pm Post subject:

Are your PCI and PCI-e buses locked at their correct frequencies?

Zcythe · Posted: Sat Aug 08, 2009 11:36 pm Post subject:

I guess so they are at 100 if im correct about what your talking about.

EDIT: In CPU-Z i found my memory is running at 5-5-5-18-22 i thought it was supposed to be 4-4-4-12?

hcavolsdsadgadsg · Posted: Sun Aug 09, 2009 12:08 am Post subject:

1. Don't use auto voltage, your MB will almost always over-compensate like crazy.

2. Your BIOS should have one way or another of showing you your FSB to memory ratio.

Mine just looks like:
[800 - 800]

which is obvious enough.

3. If you're failing to POST from such a little OC, then something is wrong. Read some guides that go over the settings in detail.

Zcythe · Posted: Sun Aug 09, 2009 12:54 am Post subject:

Polynomial · Posted: Sun Aug 09, 2009 4:46 pm Post subject:

I had a P5N32-E, which is similar to your board. Check that AI Overclock and AI NOS are disabled. Set your CPU VCore to whatever your processor is rated for (look it up) and then notch it up by around +2% (use a calculator). Add about 5 to 10MHz to the CPU clock (leave multiplier alone) and see if it works. If not, you've got faulty hardware.

Also, get the latest BIOS revision if you don't already have it.