Cheat Engine

[God601]

I have a Hercules 3D 4000xt 64mb pci.

All Direct3D test dont work but DirectDraw work.

The last 3 years , this video card worked perfectly.
Before , i played Warcraft 3 with this video card.
I will need minimum DirectX 9.0c

I need some help to restore DirectX (if possible DirectX 10) for play like Warcraft 3 and Archlord.

If possible i will need Drivers and DirectX tool for repair.

[manc]

Just download/install DirectX 10 then?

I find this odd though, because DirectDraw is a subset of DirectX.

[superweapons]

Your graphics card does not have the hardware DirectX 10 API. At best, you might have hardware DirectX 7 or 8 API support, considering that it's still using the highly obsolete PCI interface (well, for graphics cards, that is) and that you even mention DirectDraw.

You are not going to be able to play those games, without a major computer overhaul (assuming the rest of your computer is as outdated as your graphics card is).

[God601]

------------------
System Information
------------------
Time of this report: 7/8/2009, 22:52:40
Machine name: GOD601-3C805C82
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.090206-1233)
Language: French (Regional Setting: French)
System Manufacturer: ECS
System Model: M810D
BIOS: Default System BIOS
Processor: AMD Duron(tm) Processor, MMX, 3DNow, ~1.0GHz
Memory: 544MB RAM
Page File: 372MB used, 857MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 10.0 (4.10.0000.5512)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x80004005 (Generic failure) Direct3D 8 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code) Direct3D 9 test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
Display Tab 2: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: The registry information for the service provider 'DirectPlay8 TCP/IP Service Provider' is missing or damaged. You should reinstall DirectX. The registry information for the service provider 'DirectPlay8 IPX Service Provider' is missing or damaged. You should reinstall DirectX. The registry information for the service provider 'DirectPlay8 Modem Service Provider' is missing or damaged. You should reinstall DirectX. The registry information for the service provider 'DirectPlay8 Serial Service Provider' is missing or damaged. You should reinstall DirectX. You should reinstall DirectX to get the latest version.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: PowerVR KYRO 32MB/64MB
Manufacturer:
Chip type: PowerVR KYRO
DAC type: PowerVR
Device Key: Enum\PCI\VEN_104A&DEV_0010&SUBSYS_00391681&REV_01
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Écran Plug-and-Play
Monitor Max Res: 1600,1200
Driver Name: pmxdisp.dll
Driver Version: 6.13.0010.6234 (English)
DDI Version: 8
Driver Attributes: Beta Retail
Driver Date/Size: 8/22/2002 19:48:28, 49376 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: powervr.sys
Mini VDD Date: 8/22/2002 19:48:22, 566336 bytes
Device Identifier: {D7B71EAA-4350-11CF-6B6D-3320A3C2CB35}
Vendor ID: 0x104A
Device ID: 0x0010
SubSys ID: 0x00391681
Revision ID: 0x0001
Revision ID: 0x0001
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x80004005 (Generic failure)
D3D8 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)
D3D9 Test Result: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error code)