| View previous topic :: View next topic |
| Author |
Message |
Razi
Expert Cheater
 Reputation: 1
Joined: 17 Jan 2018
Posts: 205
|
 Posted: Thu May 30, 2019 5:14 am Post subject: Some kind of error |
 |
|
When I run the following script and try to open the file by clicking on the menu item, CE shows an error: Error:TControl.ChangeBounds loop detected :TCheckBox Left=0,Top=1000,Width=120,Height=17 NewLeft=0,NewTop=1001,NewWidth=120,NewHeight=17
| Code: | UDF1.MenuItem3.OnClick = function()
load_dialog = createOpenDialog(self)
load_dialog.InitalDir = os.getenv('%USERPROFILE%')
load_dialog.Filter = '.MNU (*.MNU)|*.MNU|Exe files (*.exe)|*.EXE|All files (*.*)|*'
load_dialog.execute()
local path = load_dialog.FileName
openFileAsProcess(path, r)
end |
Where is the mistake and why CE shows an error?
|
|
| Back to top |
|
 |
Corroder
Grandmaster Cheater Supreme
 Reputation: 75
Joined: 10 Apr 2015
Posts: 1668
|
| Posted: Thu May 30, 2019 6:46 am Post subject: |
|
|
The error pop-up is not CE bug, it's Lazarus bug. It happened on CE Version 6.6
Are you using a Mac? If yes then you need to modify 'wine wincfg, to set a registry key to 0 (disable) or 1 (enable).
If not, try setting your form auto size to false.
add to the top of the script table: UDF1.AutoSize = false and if the form has a panel then try to set panel align as 'alClient'.
_________________
Stealing Code From Stolen Code...
And Admit It.. Hmmm....Typically LOL |
|
| Back to top |
|
|
Razi
Expert Cheater
Reputation: 1
Joined: 17 Jan 2018
Posts: 205
|
| Posted: Thu May 30, 2019 8:59 am Post subject: |
|
|
| Corroder wrote: |
Are you using a Mac? |
I'm using Windows XP sp3
| Quote: | If not, try setting your form auto size to false.
add to the top of the script table: UDF1.AutoSize = false and if the form has a panel then try to set panel align as 'alClient'. |
Did it, but did not help.
|
|
| Back to top |
|
|
Corroder
Grandmaster Cheater Supreme
Reputation: 75
Joined: 10 Apr 2015
Posts: 1668
|
| Posted: Thu May 30, 2019 9:03 am Post subject: |
|
|
Try to use CE 6.7 or 6.8
_________________
Stealing Code From Stolen Code...
And Admit It.. Hmmm....Typically LOL |
|
| Back to top |
|
|
Razi
Expert Cheater
Reputation: 1
Joined: 17 Jan 2018
Posts: 205
|
| Posted: Thu May 30, 2019 10:01 am Post subject: |
|
|
| Corroder wrote: | | Try to use CE 6.7 or 6.8 |
Yes, used CE 6.7 and 6.8.3, but it shows an error. Perhaps this error because of windows XP.
|
|
| Back to top |
|
|
AylinCE
Grandmaster Cheater Supreme
 Reputation: 37
Joined: 16 Feb 2017
Posts: 1524
|
| Posted: Thu May 30, 2019 10:38 am Post subject: Re: Some kind of error |
|
|
| Razi wrote: | | CE shows an error: Error:TControl.ChangeBounds loop detected :TCheckBox Left=0,Top=1000,Width=120,Height=17 NewLeft=0,NewTop=1001,NewWidth=120,NewHeight=17 |
I insist here. 
Write the script code for the above error here.
Is there a definition for "New"?
Rather than WinXP, perhaps the error is in the command. 
_________________
|
|
| Back to top |
|
|
Razi
Expert Cheater
Reputation: 1
Joined: 17 Jan 2018
Posts: 205
|
| Posted: Thu May 30, 2019 11:10 am Post subject: Re: Some kind of error |
|
|
| Aylin wrote: | Write the script code for the above error here.
Is there a definition for "New"? |
Create form with menu items and use following code
| Code: | UDF1.MenuItem3.OnClick = function()
load_dialog = createOpenDialog(self)
load_dialog.InitalDir = os.getenv('%USERPROFILE%')
load_dialog.Filter = '.MNU (*.MNU)|*.MNU|Exe files (*.exe)|*.EXE|All files (*.*)|*'
load_dialog.execute()
local path = load_dialog.FileName
openFileAsProcess(path, r)
end |
|
|
| Back to top |
|
|
Corroder
Grandmaster Cheater Supreme
Reputation: 75
Joined: 10 Apr 2015
Posts: 1668
|
| Posted: Thu May 30, 2019 12:08 pm Post subject: |
|
|
@Razi: check here
https://www.cheatengine.org/forum/viewtopic.php?t=604133&sid=54feaf064a93813d762fb3fc1a98747e
https://forum.cheatengine.org/viewtopic.php?t=608543&sid=494323df0c139e1788650e61fed08aa1
https://forum.lazarus.freepascal.org/index.php?topic=10141.0
https://forum.cheatengine.org/viewtopic.php?p=5700886
So, if you insist on using CE 6.6 then follow the steps like show at link no.1 above
CE Source - MainUnit.pas near line 2675 replace:
from:
| Code: | cbsaferPhysicalMemory:=tcheckbox.create(self);
cbsaferPhysicalMemory.Caption:=strSaferPhysicalMemory;
cbsaferPhysicalMemory.Checked:=dbk32functions.saferQueryPhysicalMemory;
cbsaferPhysicalMemory.Parent:=cbPauseWhileScanning.Parent;
cbsaferPhysicalMemory.left:=cbPauseWhileScanning.left;
cbsaferPhysicalMemory.Top:=cbPauseWhileScanning.top;
cbsaferPhysicalMemory.OnChange:=cbSaferPhysicalMemoryChange; |
to:
| Code: | cbsaferPhysicalMemory:=tcheckbox.create(self);
cbsaferPhysicalMemory.Caption:=strSaferPhysicalMemory;
cbsaferPhysicalMemory.Checked:=dbk32functions.saferQueryPhysicalMemory;
cbsaferPhysicalMemory.Left:=cbPauseWhileScanning.Left;
cbsaferPhysicalMemory.Top:=cbPauseWhileScanning.Top;
cbsaferPhysicalMemory.OnChange:=cbSaferPhysicalMemoryChange;
//Fix for the changebounds bug: add the 8 lines below before setting parent
//Also setting parent after setting top & left avoids many ChangeBounds calls.
cbsaferPhysicalMemory.AnchorSideLeft.Control:=cbPauseWhileScanning.AnchorSideLeft.Control;
cbsaferPhysicalMemory.AnchorSideLeft.Side:=cbPauseWhileScanning.AnchorSideLeft.Side;
cbsaferPhysicalMemory.AnchorSideTop.Control:=cbPauseWhileScanning.AnchorSideTop.Control;
cbsaferPhysicalMemory.AnchorSideTop.Side:=cbPauseWhileScanning.AnchorSideTop.Side;
cbsaferPhysicalMemory.AnchorSideRight.Control:=cbPauseWhileScanning.AnchorSideRight.Control;
cbsaferPhysicalMemory.AnchorSideRight.Side:=cbPauseWhileScanning.AnchorSideRight.Side;
cbsaferPhysicalMemory.AnchorSideBottom.Control:=cbPauseWhileScanning.AnchorSideBottom.Control;
cbsaferPhysicalMemory.AnchorSideBottom.Side:=cbPauseWhileScanning.AnchorSideBottom.Side;
cbsaferPhysicalMemory.Parent:=cbPauseWhileScanning.Parent; |
Then you need recompile CE source code.
The error doesn't exist on my machine when trying to open MNU or form as you created.
I use Win 7 ultimate 64bit and CE 6.8.3
_________________
Stealing Code From Stolen Code...
And Admit It.. Hmmm....Typically LOL |
|
| Back to top |
|
|
AylinCE
Grandmaster Cheater Supreme
Reputation: 37
Joined: 16 Feb 2017
Posts: 1524
|
| Posted: Thu May 30, 2019 4:32 pm Post subject: Re: Some kind of error |
|
|
| Razi wrote: | | Aylin wrote: | Write the script code for the above error here.
Is there a definition for "New"? |
Create form with menu items and use following code
| Code: | UDF1.MenuItem3.OnClick = function()
load_dialog = createOpenDialog(self)
load_dialog.InitalDir = os.getenv('%USERPROFILE%')
load_dialog.Filter = '.MNU (*.MNU)|*.MNU|Exe files (*.exe)|*.EXE|All files (*.*)|*'
load_dialog.execute()
local path = load_dialog.FileName
openFileAsProcess(path, r)
end |
|
_________________
|
|
| Back to top |
|
|
Razi
Expert Cheater
Reputation: 1
Joined: 17 Jan 2018
Posts: 205
|
| Posted: Fri May 31, 2019 3:25 am Post subject: |
|
|
| Corroder wrote: | @Razi: check here
So, if you insist on using CE 6.6 then follow the steps like show at link no.1 above
CE Source - MainUnit.pas near line 2675 replace:
from:
| Code: | cbsaferPhysicalMemory:=tcheckbox.create(self);
cbsaferPhysicalMemory.Caption:=strSaferPhysicalMemory;
cbsaferPhysicalMemory.Checked:=dbk32functions.saferQueryPhysicalMemory;
cbsaferPhysicalMemory.Parent:=cbPauseWhileScanning.Parent;
cbsaferPhysicalMemory.left:=cbPauseWhileScanning.left;
cbsaferPhysicalMemory.Top:=cbPauseWhileScanning.top;
cbsaferPhysicalMemory.OnChange:=cbSaferPhysicalMemoryChange; |
to:
| Code: | cbsaferPhysicalMemory:=tcheckbox.create(self);
cbsaferPhysicalMemory.Caption:=strSaferPhysicalMemory;
cbsaferPhysicalMemory.Checked:=dbk32functions.saferQueryPhysicalMemory;
cbsaferPhysicalMemory.Left:=cbPauseWhileScanning.Left;
cbsaferPhysicalMemory.Top:=cbPauseWhileScanning.Top;
cbsaferPhysicalMemory.OnChange:=cbSaferPhysicalMemoryChange;
//Fix for the changebounds bug: add the 8 lines below before setting parent
//Also setting parent after setting top & left avoids many ChangeBounds calls.
cbsaferPhysicalMemory.AnchorSideLeft.Control:=cbPauseWhileScanning.AnchorSideLeft.Control;
cbsaferPhysicalMemory.AnchorSideLeft.Side:=cbPauseWhileScanning.AnchorSideLeft.Side;
cbsaferPhysicalMemory.AnchorSideTop.Control:=cbPauseWhileScanning.AnchorSideTop.Control;
cbsaferPhysicalMemory.AnchorSideTop.Side:=cbPauseWhileScanning.AnchorSideTop.Side;
cbsaferPhysicalMemory.AnchorSideRight.Control:=cbPauseWhileScanning.AnchorSideRight.Control;
cbsaferPhysicalMemory.AnchorSideRight.Side:=cbPauseWhileScanning.AnchorSideRight.Side;
cbsaferPhysicalMemory.AnchorSideBottom.Control:=cbPauseWhileScanning.AnchorSideBottom.Control;
cbsaferPhysicalMemory.AnchorSideBottom.Side:=cbPauseWhileScanning.AnchorSideBottom.Side;
cbsaferPhysicalMemory.Parent:=cbPauseWhileScanning.Parent; |
Then you need recompile CE source code.
The error doesn't exist on my machine when trying to open MNU or form as you created.
I use Win 7 ultimate 64bit and CE 6.8.3 |
I'm using CE 6.7 and CE 6.8.3. Lazarus downloaded and installed, but didn't find on the forum what to do next.
| Quote: | C) Compiling and Running.
1) Open Lazarus from start menu
2) Project-> Open Project
3) Browse to the folder where you downloaded source files
4) go to Cheat engine source folder
5) Select cheatengine.lpi
6) Run-> Build or (Shift+F9)
7) F9 |
then MainUnit.pas from folder: CE source\cheat-engine\trunk\Cheat Engine was changed, then what to do next, just press ctrl+F9 or shift+F9 to compile project? But lazarus shows error: Error: ppcx64.exe can't be executed, error message: Failed to execute ""ppcx64.exe" -Twin64 -MObjFPC -Scghi -O1 -g -gl -l -vewnhibq -FuI:\lazarus\packager\registration\ -FUI:\lazarus\packager\units\x86_64-win64\ fcllaz.pas
I'm using windows XP sp3 (32 bit).
|
|
| Back to top |
|
|
Corroder
Grandmaster Cheater Supreme
Reputation: 75
Joined: 10 Apr 2015
Posts: 1668
|
| Posted: Fri May 31, 2019 5:12 am Post subject: |
|
|
Download and install Lazarus version 2.0.0
Run Lazarus and click on Project->Open Project. Select cheatengine.lpi from the Cheat Engine folder as the project.
Click on Run->Build or use SHIFT+F9.
If you want to run or debug from the IDE on Windows you will need to start Lazarus as administrator.
_________________
Stealing Code From Stolen Code...
And Admit It.. Hmmm....Typically LOL |
|
| Back to top |
|
|
Corroder
Grandmaster Cheater Supreme
Reputation: 75
Joined: 10 Apr 2015
Posts: 1668
|
| Posted: Fri May 31, 2019 1:20 pm Post subject: |
|
|
I don't have recompiled CE and also I am not sure the problem will disappear since the problem seems comes from Windows XP environment.
Recompile CE source also need to define for 32bit or 64bit.
I am sure DB knows the solutions and help you.
_________________
Stealing Code From Stolen Code...
And Admit It.. Hmmm....Typically LOL |
|
| Back to top |
|
|
Dark Byte
Site Admin
 Reputation: 470
Joined: 09 May 2003
Posts: 25805
Location: The netherlands
|
| Posted: Fri May 31, 2019 1:38 pm Post subject: |
|
|
no idea.
_________________
Do not ask me about online cheats. I don't know any and wont help finding them.
Like my help? Join me on Patreon so i can keep helping |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
