I found the value for health and made pointer scan of it, but it's constantly changing during next mission or restart until no result left in pointer scan list so i have to go with asm but i'm kinda new to auto assemble. Any help appreciated.
You'll want to make sure that operation writes only to the health address specifically. Right click it and select to "see what address this instruction accesses" and let that probe for a while to see if anything else comes up. You don't want to use an instruction that effects health if it also effects enemy health. If you need another access point then you can right click your health address and select "see what accesses this address". Try to be sure you have one that only accesses your particular address, otherwise you will have to run some asm checks before executing your new code.
If you're sure the one you have is good then you can just set whatever float value you want at that memory location.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum