 |
Cheat Engine
The Official Site of Cheat Engine
|
| View previous topic :: View next topic |
| Author |
Message |
KryziK
Expert Cheater
![]() Reputation: 3
Joined: 16 Aug 2009
Posts: 199
|
 Posted: Sat Jan 12, 2013 4:00 pm Post subject: [AutoIt Release] KryMemory |
 |
|
For any of you using AutoIt out there, this is a simple library that replaces NomadMemory. These functions are more efficient and also provide more functionality than NomadMemory, but they work almost the same way.
This small library took me a total of a few hours to write, test, and document. However, much testing is left to do. The error checking could also be extended a bit more to account for new users. If you have any suggestions or find any bugs, do not hesitate to reply here. Make sure you include the code that caused the error, your operating system information, and any other relevant information.
Anyways, here it is:
KryMemory Library Download
Documented Functions:
| Code: | ; _Process_Open($sProcessName, $iDesiredAccess = $PROCESS_ALL_ACCESS, $fInheritAccess = False)
; _Process_Close($ahHandle)
; _Process_ReadMemory($ahHandle, $ivAddress, $sType = "dword")
; _Process_ReadMemoryPointer($ahHandle, $ivAddress, $aiOffsets, $sType = "dword")
; _Process_WriteMemory($ahHandle, $ivAddress, $vData, $sType = "dword")
; _Process_WriteMemoryPointer($ahHandle, $ivAddress, $aiOffsets, $vData, $sType = "dword")
; _Process_GetBaseAddress($ahHandle)
; _Process_GetParent($ahHandle)
; _Process_GetModules($ahHandle)
;
; _Address_CalculateStatic($ahHandle, $sModuleName, $ivOffset)
; _Address_CalculatePointer($ahHandle, $ivAddress, $aiOffsets)
;
; _Module_GetBaseAddress($ahHandle, $sModuleName) |
Example Script:
| Code: | #include "KryMemory.au3"
; Opens Cheat Engine's Tutorial (v3.2).
Local $oProc = _Process_Open("Tutorial-i386.exe")
; Makes sure the process was opened.
If @error Then
ConsoleWriteError("The specified process could not be opened. Error: " & @error & @CRLF)
Exit(0)
EndIf
; Lists all of the modules in the process and their base address in a nice, pretty table.
ConsoleWrite(StringFormat("%-25s%-25s", "Module Name", "Base Address") & @CRLF)
ConsoleWrite("-------------------------------------" & @CRLF)
For $sModule in _Process_GetModules($oProc)
ConsoleWrite(StringFormat("%-25s 0x%08X", $sModule, _Module_GetBaseAddress($oProc, $sModule)) & @CRLF)
Next
ConsoleWrite(@CRLF)
; Calculates the address of the value to change in Step 2.
Local $aiOffsets_StepTwo[1] = [0x464]
Local $iAddress_StepTwo = _Address_CalculatePointer($oProc, 0x00690320, $aiOffsets_StepTwo)
; Reads and displays the address and value to change in Step 2.
ConsoleWrite(StringFormat("0x%08X: %i", $iAddress_StepTwo, _Process_ReadMemory($oProc, $iAddress_StepTwo)) & @CRLF)
; Changes the value of the variable in Step 2 to 1000 to unlock the next level.
_Process_WriteMemory($oProc, $iAddress_StepTwo, 1000)
; Closes the handles created by _ProcessOpen.
_Process_Close($oProc) |
|
|
| Back to top |
|
 |
atom0s
Moderator
 Reputation: 204
Joined: 25 Jan 2006
Posts: 8579
Location: 127.0.0.1
|
| Posted: Sat Jan 12, 2013 8:04 pm Post subject: |
|
|
Comparing the two I fail to see how yours is any more "efficient" given that it is the same exact stuff just with some things renamed and altered slightly. I doubt you are going to get anyone to use it if that is your "sales pitch" for it since most will just look at it and see the same thing.
Might want to go back and do things different entirely, add more features that will interest people more, or do something major that will get people interested in switching to it.
As it looks now, you just renamed the functions and some variables and slightly changed some minor things.
_________________
- Retired. |
|
| Back to top |
|
|
KryziK
Expert Cheater
![]() Reputation: 3
Joined: 16 Aug 2009
Posts: 199
|
| Posted: Sat Jan 12, 2013 10:00 pm Post subject: |
|
|
Honestly, I don't care if people use it or not. I made it for a friend and posted it here for everyone else. It is a bit more efficient and stable in terms of the DllCalls and what not, but most people probably won't notice the difference. I did write it from scratch, though. I used the array of handles idea because of the lack of classes, but that's about it.
Edit: Also, some versions of NomadMemory float around without certain functions that others have. This has that extra function or two, and hopefully is pretty easy to understand for beginners.
|
|
| Back to top |
|
|
NoobCheaterhaha
How do I cheat?
![]() Reputation: 0
Joined: 08 May 2013
Posts: 7
|
| Posted: Fri Aug 30, 2013 8:25 am Post subject: |
|
|
I am sorry dude but it doesn't work at all with CE either I tested above code with tutorial step2 (doesnt change value) then I applied my adress + offset too (there is a little difference) and it failed..
I have CE 6.3 and Autoit3 3.3.8.1
|
|
| Back to top |
|
|
KryziK
Expert Cheater
![]() Reputation: 3
Joined: 16 Aug 2009
Posts: 199
|
| Posted: Fri Aug 30, 2013 9:38 am Post subject: |
|
|
| NoobCheaterhaha wrote: | I am sorry dude but it doesn't work at all with CE either I tested above code with tutorial step2 (doesnt change value) then I applied my adress + offset too (there is a little difference) and it failed..
I have CE 6.3 and Autoit3 3.3.8.1 |
I'm going to need more information to try and help you. Sometimes new versions of AutoIt don't work the same as they used to, but I can't see that being the issue. Can you post more info like what address and offsets you're trying, perhaps with a screenshot of CE and even the lines of AutoIt code?
Thanks
|
|
| Back to top |
|
|
NoobCheaterhaha
How do I cheat?
![]() Reputation: 0
Joined: 08 May 2013
Posts: 7
|
| Posted: Sat Aug 31, 2013 3:45 am Post subject: |
|
|
Hi, I forgot to mention that my OS is Win7 64bits.
I added cheat table to attachments
Au3 script: Just changed offset + Adress according to cheat table
| Code: |
#include "KryMemory.au3"
; Opens Cheat Engine's Tutorial (v3.2).
Local $oProc = _Process_Open("Tutorial-i386.exe")
; Makes sure the process was opened.
If @error Then
ConsoleWriteError("The specified process could not be opened. Error: " & @error & @CRLF)
Exit(0)
EndIf
; Lists all of the modules in the process and their base address in a nice, pretty table.
ConsoleWrite(StringFormat("%-25s%-25s", "Module Name", "Base Address") & @CRLF)
ConsoleWrite("-------------------------------------" & @CRLF)
For $sModule in _Process_GetModules($oProc)
ConsoleWrite(StringFormat("%-25s 0x%08X", $sModule, _Module_GetBaseAddress($oProc, $sModule)) & @CRLF)
Next
ConsoleWrite(@CRLF)
; Calculates the address of the value to change in Step 2.
Local $aiOffsets_StepTwo[1] = [0x480]
Local $iAddress_StepTwo = _Address_CalculatePointer($oProc, 0x231300, $aiOffsets_StepTwo)
; Reads and displays the address and value to change in Step 2.
ConsoleWrite(StringFormat("0x%08X: %i", $iAddress_StepTwo, _Process_ReadMemory($oProc, $iAddress_StepTwo)) & @CRLF)
; Changes the value of the variable in Step 2 to 1000 to unlock the next level.
_Process_WriteMemory($oProc, $iAddress_StepTwo, 1000)
; Closes the handles created by _ProcessOpen.
_Process_Close($oProc) |
| Description: |
|
Download |
| Filename: |
Tutorial-i386 [CE 6.3] STEP 2.CT |
| Filesize: |
451 Bytes |
| Downloaded: |
8696 Time(s) |
|
|
| Back to top |
|
|
KryziK
Expert Cheater
![]() Reputation: 3
Joined: 16 Aug 2009
Posts: 199
|
| Posted: Wed Sep 04, 2013 2:07 pm Post subject: |
|
|
| NoobCheaterhaha wrote: | Hi, I forgot to mention that my OS is Win7 64bits.
I added cheat table to attachments
Au3 script: Just changed offset + Adress according to cheat table
| Code: |
#include "KryMemory.au3"
; Opens Cheat Engine's Tutorial (v3.2).
Local $oProc = _Process_Open("Tutorial-i386.exe")
; Makes sure the process was opened.
If @error Then
ConsoleWriteError("The specified process could not be opened. Error: " & @error & @CRLF)
Exit(0)
EndIf
; Lists all of the modules in the process and their base address in a nice, pretty table.
ConsoleWrite(StringFormat("%-25s%-25s", "Module Name", "Base Address") & @CRLF)
ConsoleWrite("-------------------------------------" & @CRLF)
For $sModule in _Process_GetModules($oProc)
ConsoleWrite(StringFormat("%-25s 0x%08X", $sModule, _Module_GetBaseAddress($oProc, $sModule)) & @CRLF)
Next
ConsoleWrite(@CRLF)
; Calculates the address of the value to change in Step 2.
Local $aiOffsets_StepTwo[1] = [0x480]
Local $iAddress_StepTwo = _Address_CalculatePointer($oProc, 0x231300, $aiOffsets_StepTwo)
; Reads and displays the address and value to change in Step 2.
ConsoleWrite(StringFormat("0x%08X: %i", $iAddress_StepTwo, _Process_ReadMemory($oProc, $iAddress_StepTwo)) & @CRLF)
; Changes the value of the variable in Step 2 to 1000 to unlock the next level.
_Process_WriteMemory($oProc, $iAddress_StepTwo, 1000)
; Closes the handles created by _ProcessOpen.
_Process_Close($oProc) |
|
"Local $iAddress_StepTwo = _Address_CalculatePointer($oProc, 0x231300, $aiOffsets_StepTwo)" is the problem it would seem.
0x231300 is the offset from Tutorial-i386.exe. You either need to add it to the base address of that process or just use 0x631300.
Let me know if that solves your problem.
|
|
| Back to top |
|
|
NoobCheaterhaha
How do I cheat?
![]() Reputation: 0
Joined: 08 May 2013
Posts: 7
|
| Posted: Thu Sep 05, 2013 1:24 pm Post subject: |
|
|
Thanks it works with 0x631300 adress ,but I don't understand why you chose this specific adress. Can you explain me?
Last edited by NoobCheaterhaha on Thu Sep 05, 2013 1:36 pm; edited 2 times in total |
|
| Back to top |
|
|
KryziK
Expert Cheater
![]() Reputation: 3
Joined: 16 Aug 2009
Posts: 199
|
| Posted: Thu Sep 05, 2013 1:26 pm Post subject: |
|
|
| NoobCheaterhaha wrote: | | Thanks it works with 0x631300 adress ,but I don't understand why you chose this specific adress. Can you explain me? |
Tutorial-i386.exe+0x231300 is the same as 0x631300 in this case due to the fact that Tutorial-i386.exxe happens to be 0x400000 (common, but not always true for processes).
The substitute to 0x631300 would be GetModuleBaseAddress on Tutorial-i386.exe and add 0x231300 to it.
|
|
| Back to top |
|
|
NoobCheaterhaha
How do I cheat?
![]() Reputation: 0
Joined: 08 May 2013
Posts: 7
|
| Posted: Thu Sep 05, 2013 1:36 pm Post subject: |
|
|
Okay thanks.
Btw
could you add function to execute asm code?
edit
offsets must be writed inversely from bottom to top in CE
|
|
| Back to top |
|
|
Shinobi_Mega
How do I cheat?
![]() Reputation: 0
Joined: 25 Jan 2022
Posts: 7
|
| Posted: Thu Aug 15, 2024 2:15 am Post subject: |
|
|
I have a problem reading the module address, could you help me or explain where I'm going wrong? Thank you for your help so far.
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
