Cheat Engine

kls85 · Posted: Sun May 03, 2009 10:04 am Post subject:

Explain clearly cause you're not making any sense.

maplerpro · Posted: Sun May 03, 2009 11:07 am Post subject:

Karakawe · Posted: Sun May 03, 2009 11:44 am Post subject:

What defragmenter are you trying to use?
Go to this site and download JKDefrag. Boot into safe mode (by holding F8 while your computer turns on and selecting "Safe Mode") and run the program. If there are any errors or problems, check the log or post it up here.

maplerpro · Posted: Sun May 03, 2009 11:47 am Post subject:

Karakawe · Posted: Sun May 03, 2009 11:49 am Post subject:

If that's what you had used previously and the files didn't seem to have been moved, I recommend you don't use the program, or try in Safe Mode, when fewer processes will be around to access files on the partition. It's best that you have everything closed while defragging, so you can let the program do its thing.

maplerpro · Posted: Sun May 03, 2009 11:51 am Post subject:

kls85 · Posted: Sun May 03, 2009 12:07 pm Post subject:

You are still not making any sense, but according to the picture you posted, the problem is you cannot use your 2nd partition (Drive D:\) as that is a factory drive containing the original OS which was shipped with your PC. Most of the time they're protected and cannot be modified under Windows (special tools can remove them), but it's not encouraged or recommended.

With that out of the way, you actually have one partition (Drive C:\) and by moving what ever you got to the "end" of the drive or so, it's still in drive C:\! If you want to dual boot you'll have 2 options:

1. Backup all your data
2. Use a partition and format tool to split that C:\ in half
3. Install the individual OS into each clean partition.

or

1. Use a partitioning tool, where format is not necessary (Vista has it build in, but always backup data first.)
2. Install the operating system on to the 2nd partition (for Vista with Win7 only, For XP with Vista use the first option).

If this is done correctly you should have 3 partitions. Not 2 which is what you currently have.

You can add this to your list.

maplerpro · Posted: Sun May 03, 2009 1:07 pm Post subject:

I cant use the partition tool because there are system files at the end of the partition, it gives me an error...

Also i never even bothered with the 2nd partition...

kls85 · Posted: Sun May 03, 2009 1:18 pm Post subject:

1. Scan your hard drive for errors by using the chkdsk command under command prompt.

2. Disable pagefile (if you got at least 1GB or more of ram)

3. Defrag HD

4. Enable pagefile

restart computer when necessary

akinos · Posted: Sun May 03, 2009 1:33 pm Post subject:

i got the same problem

maplerpro · Posted: Sun May 03, 2009 3:14 pm Post subject:

End Result:

Now im going to do safe mode defrag and then offline

EDIT: PerfectDisk doesnt work in safe mode..

After Offline Defrag

Karakawe · Posted: Sun May 03, 2009 6:55 pm Post subject:

The program you're trying to use is excluding some of the files at the end of the partition. Meaning that multiple defrags won't change anything in that respect. Give it a shot with JKDefrag in Safe mode and just leave the computer to do its thing. You don't even have to install anything.. :\

maplerpro · Posted: Sun May 03, 2009 7:46 pm Post subject: