| View previous topic :: View next topic |
| Author |
Message |
Leader of the Revolution
Grandmaster Cheater
 Reputation: 6
Joined: 12 Sep 2008
Posts: 724
|
 Posted: Mon Mar 02, 2009 6:20 pm Post subject: How do I apply Thermal Compound? |
 |
|
ok so i got some thermal compound and currently searching on how to apply it but i thought why not make a post and search at the same time?
so how do i apply it
_________________
|
|
| Back to top |
|
 |
hcavolsdsadgadsg
I'm a spammer
![]() Reputation: 26
Joined: 11 Jun 2007
Posts: 5801
|
| Posted: Mon Mar 02, 2009 6:57 pm Post subject: |
|
|
You don't read the instructions to start off with...
Just put a small bit in the middle and let the heatsink spread it.
|
|
| Back to top |
|
|
timelist
Cheater
![]() Reputation: 0
Joined: 04 Aug 2008
Posts: 45
Location: Invisible
|
| Posted: Thu Mar 05, 2009 11:02 pm Post subject: |
|
|
its so easy even i could do it
1. open da case
2. put ur hand in da case
3. take out dat cpu fan
4. zomg! thers a cpu in there
and remember (stolen off newegg)
LESS IS MORE!! USE ONLY TWO RICE SIZED GRAINS (UNCOOKED) WORTH OF ARCTIC SILVER ON THE CENTER OF CPU. SPIN AROUND A FEW TIMES UNILL YOU HAVE A QUARTER SIZED CIRCLE IN THE MIDDLE. DONE AND DONE.
_________________
Cant see me! |
|
| Back to top |
|
|
Karakawe
I post too much
 Reputation: 3
Joined: 17 Apr 2007
Posts: 3899
|
| Posted: Fri Mar 06, 2009 2:45 pm Post subject: |
|
|
Lol'd @ "UNCOOKED".
Yeah, you really only need a small dot or very thin line down the center (what's recommended for newer CPUs), although the HS/Fan should really spread it all out anyway.
|
|
| Back to top |
|
|
Ndure
Master Cheater
![]() Reputation: 1
Joined: 05 Apr 2008
Posts: 317
|
| Posted: Sat Mar 07, 2009 3:15 pm Post subject: |
|
|
every thermal compound has their own recommended way to apply it on specific cpus.
some recommend putting a straight line across while some recommend putting a little dot.
what's the name of the thermal compound do you have?
|
|
| Back to top |
|
|
Humper
Grandmaster Cheater Supreme
 Reputation: 0
Joined: 06 Jan 2007
Posts: 1545
|
| Posted: Sat Mar 07, 2009 4:54 pm Post subject: |
|
|
| Ndure wrote: | every thermal compound has their own recommended way to apply it on specific cpus.
some recommend putting a straight line across while some recommend putting a little dot.
what's the name of the thermal compound do you have? |
Theres no difference on what compound he have, not when applying the
compound.
You said the 2 different ways. They work on (almost) every compound.
|
|
| Back to top |
|
|
Ndure
Master Cheater
![]() Reputation: 1
Joined: 05 Apr 2008
Posts: 317
|
| Posted: Sat Mar 07, 2009 6:03 pm Post subject: |
|
|
| Humper wrote: | | Ndure wrote: | every thermal compound has their own recommended way to apply it on specific cpus.
some recommend putting a straight line across while some recommend putting a little dot.
what's the name of the thermal compound do you have? |
Theres no difference on what compound he have, not when applying the
compound.
You said the 2 different ways. They work on (almost) every compound. |
there is a difference, and f.y.i you can kill a cpu by using too much conductive thermal paste.
|
|
| Back to top |
|
|
hcavolsdsadgadsg
I'm a spammer
![]() Reputation: 26
Joined: 11 Jun 2007
Posts: 5801
|
| Posted: Sat Mar 07, 2009 6:15 pm Post subject: |
|
|
Maybe if you slather the entire tube all over the place like an idiot.
Some goop doesn't conduct electricity, like ceramique and the MX stuff. Worst case scenario is you overheat, trip the thermal warning and your computer shuts off.
|
|
| Back to top |
|
|
iTz SWAT
I post too much
 Reputation: 1
Joined: 20 Dec 2007
Posts: 2227
Location: Me.Location;
|
| Posted: Sat Mar 07, 2009 6:56 pm Post subject: |
|
|
If i put a line accross the cpu.
And spread it with a stick or something.
Will it be enough to cover hole cpu?
What do you recommend?
1 thin layer of thermal compund or just a dot and let heat sink spread it?
_________________
|
|
| Back to top |
|
|
Karakawe
I post too much
Reputation: 3
Joined: 17 Apr 2007
Posts: 3899
|
| Posted: Sat Mar 07, 2009 8:11 pm Post subject: |
|
|
| bioshocked wrote: | If i put a line accross the cpu.
And spread it with a stick or something.
Will it be enough to cover hole cpu?
What do you recommend?
1 thin layer of thermal compund or just a dot and let heat sink spread it? |
You don't even have to spread it if you do the line. Either way, the HS will distribute the compound.
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
