Cheat Engine

AJarOfLube · Newbie cheater Reputation: 0 Joined: 30 Dec 2015 Posts: 12

When I write an auto-assembler script that injects code using eg. "AOB Injection", is there an easy way to debug it? As in, see where the code has been injected so I can set breakpoints, etc?

ParkourPenguin · Posted: Sun Jan 03, 2016 7:54 pm Post subject:

Use registersymbol on the name of your allocated memory.

++METHOS · Posted: Sun Jan 03, 2016 8:23 pm Post subject:

You can also just follow the jump.

AJarOfLube · Newbie cheater Reputation: 0 Joined: 30 Dec 2015 Posts: 12

@Methos Then I have to find the jmp, no? So that will only work the first time I'm working on a script, not subsequent attempts.

++METHOS · Posted: Sun Jan 03, 2016 8:52 pm Post subject:

What? You have the module address+offset that you can use to find the injection point. From there, just follow the jump. If you must use AOB, you can find it that way. Otherwise, just do as ParkourPenguin has suggested and use a custom symbol to find it.

Zanzer · Posted: Sun Jan 03, 2016 9:47 pm Post subject:

When you define the AOB Injection, you provide it with a name.
Right-click in the address space and select Go to address.
Type in that name. The script must first be enabled.